The previous tutorial provided the steps required to install multiple PHP versions on Ubuntu 20.04 LTS. You can follow How To Install Multiple Versions Of PHP On Ubuntu 20.04 LTS.
Switch PHP versions - CLI
Verify the currently active PHP as shown below.
# Verify PHP php --version
# Output PHP 8.0.13 (cli) (built: Nov 22 2021 09:50:43) ( NTS ) Copyright (c) The PHP Group Zend Engine v4.0.13, Copyright (c) Zend Technologies with Zend OPcache v8.0.13, Copyright (c), by Zend Technologies
We can configure multiple versions of PHP installed on Ubuntu 20.04 LTS using the commands as shown below.
# PHP 7.0 sudo update-alternatives --set php /usr/bin/php7.0 sudo update-alternatives --set phar /usr/bin/phar7.0 sudo update-alternatives --set phar.phar /usr/bin/phar.phar7.0
# PHP 8.0 sudo update-alternatives --set php /usr/bin/php8.0 sudo update-alternatives --set phar /usr/bin/phar8.0 sudo update-alternatives --set phar.phar /usr/bin/phar.phar8.0
Now we can switch among PHP 7.0 or PHP 8.0 using the commands as shown below.
# Switch PHP sudo update-alternatives --config php
# Output There are 2 choices for the alternative php (providing /usr/bin/php).
Selection Path Priority Status ------------------------------------------------------------ 0 /usr/bin/php8.0 80 auto mode 1 /usr/bin/php7.0 70 manual mode * 2 /usr/bin/php8.0 80 manual mode
Press <enter> to keep the current choice[*], or type selection number: 1 update-alternatives: using /usr/bin/php7.0 to provide /usr/bin/php (php) in manual mode
# Switch sudo update-alternatives --config phar
# Output There are 2 choices for the alternative phar (providing /usr/bin/phar).
Selection Path Priority Status ------------------------------------------------------------ 0 /usr/bin/phar8.0 80 auto mode 1 /usr/bin/phar7.0 70 manual mode * 2 /usr/bin/phar8.0 80 manual mode
Press <enter> to keep the current choice[*], or type selection number: 1 update-alternatives: using /usr/bin/phar7.0 to provide /usr/bin/phar (phar) in manual mode
# Switch sudo update-alternatives --config phar.phar
# Output There are 2 choices for the alternative phar.phar (providing /usr/bin/phar.phar).
Selection Path Priority Status ------------------------------------------------------------ 0 /usr/bin/phar.phar8.0 80 auto mode 1 /usr/bin/phar.phar7.0 70 manual mode * 2 /usr/bin/phar.phar8.0 80 manual mode
Press <enter> to keep the current choice[*], or type selection number: 1 update-alternatives: using /usr/bin/phar.phar7.0 to provide /usr/bin/phar.phar (phar.phar) in manual mode
Now, again verify the currently active PHP as shown below.
# Verify PHP php --version
# Output PHP 7.0.33-57+ubuntu20.04.1+deb.sury.org+1 (cli) (built: Nov 19 2021 06:39:53) ( NTS ) Copyright (c) 1997-2017 The PHP Group Zend Engine v3.0.0, Copyright (c) 1998-2017 Zend Technologies with Zend OPcache v7.0.33-57+ubuntu20.04.1+deb.sury.org+1, Copyright (c) 1999-2017, by Zend Technologies
This is helpful for the applications reliable on the PHP in CLI mode to run console based programs. We can switch among the multiple versions of PHP installed on Ubuntu systems.
Switch PHP versions - Apache Web Server
Similar to CLI mode, we can also switch among multiple versions of PHP for the Apache Web Server. In the previous tutorial - How To Install Multiple Versions Of PHP On Ubuntu 20.04 LTS, we saw that the PHP version remains same i.e. PHP 7.0 even after installing the recent version of PHP i.e. PHP 8.0 as shown in Fig 1.
Fig 1
We can switch among the PHP versions for the Apache Web server using the commands as shown below.
# Disable PHP 7.0 sudo a2dismod php7.0
# Output Module php7.0 disabled. To activate the new configuration, you need to run: systemctl restart apache2
# Enable PHP 8.0 sudo a2enmod php8.0
# Output Considering dependency mpm_prefork for php8.0: Considering conflict mpm_event for mpm_prefork: Considering conflict mpm_worker for mpm_prefork: Module mpm_prefork already enabled Considering conflict php5 for php8.0: Enabling module php8.0. To activate the new configuration, you need to run: systemctl restart apache2
# Restart Apache Web Server sudo service apache2 restart
Now, again refresh the info.php using the Web Browser. It should be similar to Fig 2.
Fig 2
We can also switch back to PHP 7 using the same commands.
Switch PHP versions - Apache Web Server - PHP FPM
Instead of switch PHP version for Apache Web Server which impacts all the Virtual Hosts, we can also configure the selected Virtual Host to use the PHP version specified by us. We can do so using PHP FPM installed by us as shown in How To Install Multiple Versions Of PHP On Ubuntu 20.04 LTS.
# Check Status - PHP 7.0 FPM systemctl status php7.0-fpm
# Output ● php7.0-fpm.service - The PHP 7.0 FastCGI Process Manager Loaded: loaded (/lib/systemd/system/php7.0-fpm.service; enabled; vendor preset: enabled) Active: active (running) since Sat 2021-12-04 20:35:28 PST; 1h 14min ago Docs: man:php-fpm7.0(8) Main PID: 42546 (php-fpm7.0) Status: "Processes active: 0, idle: 2, Requests: 0, slow: 0, Traffic: 0req/sec" Tasks: 3 (limit: 9432) Memory: 18.1M CGroup: /system.slice/php7.0-fpm.service ├─42546 php-fpm: master process (/etc/php/7.0/fpm/php-fpm.conf) ├─42548 php-fpm: pool www └─42549 php-fpm: pool www Dec 04 20:35:28 ubuntu systemd[1]: Starting The PHP 7.0 FastCGI Process Manager... Dec 04 20:35:28 ubuntu systemd[1]: Started The PHP 7.0 FastCGI Process Manager.
# Check Status - PHP 8.0 FPM systemctl status php8.0-fpm
# Output ● php8.0-fpm.service - The PHP 8.0 FastCGI Process Manager Loaded: loaded (/lib/systemd/system/php8.0-fpm.service; enabled; vendor preset: enabled) Active: active (running) since Sat 2021-12-04 21:15:28 PST; 35min ago Docs: man:php-fpm8.0(8) Process: 61492 ExecStartPost=/usr/lib/php/php-fpm-socket-helper install /run/php/php-fpm.sock /etc/php/8.0/fpm/pool.d/www.co> Main PID: 61489 (php-fpm8.0) Status: "Processes active: 0, idle: 2, Requests: 0, slow: 0, Traffic: 0req/sec" Tasks: 3 (limit: 9432) Memory: 10.7M CGroup: /system.slice/php8.0-fpm.service ├─61489 php-fpm: master process (/etc/php/8.0/fpm/php-fpm.conf) ├─61490 php-fpm: pool www └─61491 php-fpm: pool www Dec 04 21:15:28 ubuntu systemd[1]: Starting The PHP 8.0 FastCGI Process Manager... Dec 04 21:15:28 ubuntu systemd[1]: Started The PHP 8.0 FastCGI Process Manager.
We can see that both PHP 7.0 FPM and PHP 8.0 FPM are in running state. Now, enable Apache2 to use multiple versions of PHP using the command as shown below.
# Install FCGID sudo apt install libapache2-mod-fcgid
# Enable FCGID sudo a2enmod actions fcgid alias proxy_fcgi
# Restart Apache sudo service apache2 restart
Also, update the Virtual Host as shown below.
<VirtualHost *:80> ---- ----
<FilesMatch \.php$> # For Apache version 2.4.10 and above SetHandler "proxy:unix:/run/php/php7.0-fpm.sock|fcgi://localhost" </FilesMatch>
---- ---- </VirtualHost>
Also, reload Apache as shown below.
# Reload Apache sudo service apache2 reload
Now, check the output of info.php using the Browser. It should show the configurations specific to PHP 7. Similarly, we can change PHP 7 to PHP 8 for the selected virtual host, without impacting the other virtual hosts.
Switch PHP versions - NGINX
Switching PHP version for NGINX is straight-forward, since it uses PHP FPM to execute the PHP scripts. We can simply specify the PHP version while configuring the Server Block as shown below. You can also follow How To Install PHP For Nginx On Ubuntu 20.04 LTS for more details.
# Server Block with PHP FPM sudo nano /etc/nginx/sites-available/example.com
server { ... ...
# pass the PHP scripts to FastCGI
location ~ \.php$ {
root /var/www/example.com/html;
fastcgi_intercept_errors on;
fastcgi_pass unix:/run/php/php7.0-fpm.sock;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME $document_root/$fastcgi_script_name;
include fastcgi_params; }
...
... }
Summary
This tutorial provided the steps required to switch among the multiple PHP versions installed on Ubuntu 20.04 LTS for CLI, Apache Web Server, and NGINX.
